By: fsbic
20 October 2010- The hydraulic control valve is the valve that controlled by hydraulic pressure. It is composed of a main valve and other attachments, such as pipeline, pilot valve, needle valve, ball valve and manometer. According to the use, function and different occasions, it could evolve into telecontrol float valve, reducing valve, slow shut hydraulic check valves, flow control valve, release valve, hydraulic electric control valve and pump control valve, etc.
The hydraulic control valve should be installed strainer and facilitated to drainage.
The hydraulic control valve makes good use of smooth run water, so there is no need to add motor oil. If the main valve's spare parts are damaged, please do dismantling under the following instructions. usually the damaged ones consumed in the inner valve are membranes and o-rings, the others are less.
1. First closing the gate valve forward and back of the main valve.
2. Loosing the tube union screw on the main bonnet to releasing the inner pressure.
3. Unsling all the screws include the essential copper pipe in the control pipeline.
4. Take bonnet and spring.
5. Lift down the central spindle, membrane, piston, take care the membrane.
6. After taking away all of the above, examining whether the marine and o-ring are damaged. If not, please do not subdivide the inner spare parts by yourself.
7. If you find the membrane or o-ring damaged, please loose the cap on the central spindle and resolve them gradually. After doing that, you may install the new membrane and o-ring.
8. Exactly check whether the main valve's seat and central spindle are damaged and clean the sundries inside if there is.
9. Assembly the main valve's spare parts according to the opposite direction. Note without blocking.
All rights reserved by FBIC Inc., do remember to show the source (www.fsbic.com) of the news when copying.
About the Author
FBIC Inc., a member of Siduona group in flow-control business, has over 15 year experience in manufacturing ball valve, gate valve, globe valve, check check valve, plug valve and butterfly valve in carbon steel, stainless steel Valve.
(ArticlesBase SC #933105)
Article Source: http://www.articlesbase.com/ -
Features and Maintenances of Hydraulic Control Valve
