TECHNICAL SPECIFICATIONS:

Models		SPI-50	SPI-75	SPI-100	SPI-200	SPI-400	SPI-600	SPI-800	SPI-1000	SPI-1500	SPI-2000
Plasticizing Cap.	Kg/hr	25	30	35	50	60	85	120	150	175	250
Shot capacity (Polysterene)	Gms	50	75	100	200	400	600	800	1000	1500	2000
Screw diameter	MM	30	35	40	45	55	60	70	80	90	100
Injection stroke	MM	125	150	155	200	225	250	275	300	350	400
Injection pressure	Kg /CM2	1800	2200	1750	1750	1800	1800	2200	2200	1800	1800
Screw rotation/ speed variable	RPM	DIRECT HYDRAULIC MOTOR (Danfoss)
Heating zones		2	2	2	3	3	4	4	5	5	6
Hopper capacity	Kgs	20	25	25	25	25	30	30	50	50	75
L/D ratio		18:1	18:1	18:1	18:1	20:1	20:1	20:1	20:1	20:1	20:1
LOCKING SYSTEM TWIN HARDENED TOGGLES
Mould clamping force	TONS	30	50	75	130	200	300	350	425	450	500
Clamping stroke	MM	200	275	300	350	400	450	500	600	650	750
Size of mould platen (HXW)	MM	350X350	400X350	500X400	600X500	650X600	750X650	800X700	1000X800	1200X1000	1300X1000
Tie bar diameter	MM	50	55	60	80	85	90	100	125	130	150
Distance between tie bars	(HXW) MM	250X200	300X200	350X250	400X300	500X350	550X350	600X400	650X450	700X500	800X600
Minimum mould height	MM	150	200	200	200	200	250	250	300	350	400
Maximum mould height	MM	300	350	350	400	450	500	550	600	650	750
Daylight opening	MM	500	600	600	700	850	950	1050	1200	1250	1500
Oil tank capacity	LtRS.	225	300	450	450	500	500	800	1200	1200	1600
Main electric motor (A.C.)	H.P.	7.5	7.5	15.00	20.00	25.00	30.00	40.00	50.00	60.00	75.00
Heating capacity	KW	2.0	3.0	5.5	7.5	10.00	12.5	15.0	20.0	20.0	25.0
Screw electric motor	H.P.	2.0	3.0	3.0	5.0	7.0	10.0	15.0	20.0	25.0	30.0
Installed total power	H.P.	11.5	13.5	23.5	32.5	42.5	52.5	70.0	90.0	105.0	130
Net weight	TONS	1.3	1.5	2.0	3.0	5.0	7.5	0.0	15.0	18.0	20.0